fbpx Skip to main content

50A ABSO Kisae BATTERY CHARGER-DC to DC DMT-1250 Series-Original

$279.00

5 in stock

Description

DC to DC Battery Charger Series

BATTERY CHARGER KISAE ABSO DMT-1250

In-vehicle optimal charging and maintenance for marine and RV deep-cycle batteries.

  • Dual Input Capability: MPPT Solar Input & Auxiliary Input.
  • Multi-stage battery charger ensures that your batteries are charged the way battery manufacturers recommend.
  • Small footprint, extremely compact design.
  • Saves money by maximizing battery life.

Features and Benefits:

  • DC to DC Battery Charger
  • Microprocessor controlled multi-stage charging algorithms (bulk, absorption, float) for gel, flooded and AGM batteries and equalization for flooded batteries
  • Silent mode for quiet operation
  • MPPT solar regulator allows you to provide maximum power from solar panels to battery
  • Optional remote allows you to view system information
ABSO DC – DC BATTERY CHARGERS DMT 1250
DC CONTROLLER OUTPUT:
OUTPUT CURRENT (MAXIMUM) 50A
OUTPUT VOLTAGE RANGE:
CHARGE 13.5 – 15.5 V
FLOAT 13.0 – 13.8 V for 12V Battery
EQUALIZE 15.5 V
CHARGING CONTROL Five Stages (Test/Bulk/Absorption/Float/Recharge)Four Stages (Test/Bulk/Absorption/Recharge)

Constant Power Supply (Program Setting)

DC OUTPUT BANK One
SELECTABLE BATTERY TYPE Gel, AGM, Flooded, Lithium, Program
PARASITIC CURRENT < 10 uA
EFFICIENCY > 90%
DC INPUT (BATTERY/ALTERNATOR):
DC INPUT RANGE 10.5 – 32 Vdc
DC INPUT NOMINAL OPERATION 12.8 V charging system
25.6V for 24V charging system
ENGINE START CONTROL: ON DC Input from Battery/Alternator
ENGINE START CONTROL: OFF DC Input from PV Input (if available)
DC INPUT (PV INPUT):
DC INPUT RANGE 10.5 – 32 Vdc
DC INPUT NOMINAL OPERATION 17.5Vdc for 12V PV panels connected in parallel35.0Vdc for Dual 12V PV panel connected in series
MPPT TRACKING EFFICIENCY >98% (Target)
DC OUTPUT PROTECTION AND FEATURES:
REVERSE BATTERY Yes (shutdown)Automatically reset
DC OUTPUT SHORT CIRCUIT Yes (shutdown)Automatically reset
OVER CHARGE Yes (shutdown)
OVER TEMPERATURE Yes (de-rated and shutdown)
DC FUSE 2*30A, 32V
COOLING Force Air Ventilation
TEMPERATURE SETTING Hot, Nominal, Cold (no sensor connected)
BATTERY TEMPERATURE SENSOR PORT RJ12 (optional battery temperature sensor use)
DIGITAL DISPLAY PORT RJ12 (optional display panel use)
DISPLAY/INDICATOR:
INDICATOR ON UNIT Flashing Green LED: Charging in process
Solid green LED: Fully Charged
BUILT-IN DISPLAY OR THROUGH RJ12 PORT LED Display with back lighting
Charging status, Battery Voltage
WARNING AND FAULT CODE On unit: Fault LED (red)
Digital Display: A01, E01-09
DC OUTPUT CONNECTION:
POWER CONNECTION Heavy Duty Connector
ACCESSORY (OPTIONAL):
REMOTE DISPLAY Heavy Duty Connector
BATTERY TEMPERATURE SENSOR Yes (battery temperature sensing)

Kisae 1250 DC-DC_Charger_System_Diagram

dmt1230_dmt1250_owners_guide

 

Additional information

Weight 6 lbs
Dimensions 9.5 × 6.8 × 2.9 in

Reviews

There are no reviews yet.

Only logged in customers who have purchased this product may leave a review.