Cummins VMH-70 Touchscreen Digital Display Panel with Rocker Switches
Fully-Wire
Panel Material: Marine Acrylic, Polycarbonate, Marine Plexiglass
Black Panel / Veratron VMH-70 Touchscreen Display
VMH-70 Features:
- 7″ Sun-Readable IPS TFT Touchscreen Display with Customizable Startup Screen
- Monitors up to 2 Engines
- NMEA 2000 Certified
- Dual SAE J1939 CAN Ports
- 12v & 24v Compatible
- Engine 1 Connector Display:
- Tachometer
- Volt
- Additional Resistive Signal 1
- Additional Resistive Signal 2
- Engine Input 2 Can Display:
- Tachometer
- Volt
- Additional Resistive Signal 1
- Additional Resistive Signal 2
- Additional Resistive Signal 3
- Additional Resistive Signal 4
- Engine Input 2 Can be Used to Expand Engine Input 1 if Only One Engine is Present
- Link Up’s can be Used to Expand Engine 1 & 2 if Needed
Kit Includes:
- Fully-Wired Marine-Grade Panel with Veratron-70 VMH Screen Display
- Engine Alarm Warning LED
- Rocker Switches For Enable, Start & Shutdown (Fully Customizable — Number of Switches and/or Cover Types)
- Piezo Siren Alarm
- Temperature Sending Unit
- Oil Pressure Sending Unit
*Sending Units May Vary Depending on Engine(s)*
*Engine Wiring Harness (Optional Add-On): Lengths of 15ft and 25ft.
*If You Need any Other Length, No Problem — Just Give us a Call!*
-
- Single Cable with 12 Marine-Grade Wires
- 14 Gauge: Black
- 14 Gauge: Red
- 16 Gauge: Dark Blue
- 16 Gauge: Light Blue
- 16 Gauge: Dark Brown
- 16 Gauge: Light Brown
- 16 Gauge: Gray
- 16 Gauge: Yellow
- 16 Gauge: White
- 16 Gauge: Purple
- 16 Gauge: Light Blue/White Stipe
- 16 Gauge: Dark Blue/White Stripe
- Single Cable with 12 Marine-Grade Wires
- This Product Offers a Unique Flame-Retardant Polyvinyl Chloride Compound (VW-1) and is Moisture, Abrasion, Acid, Diesel Fuel, and Oil Resistant. It is Extremely Flexible & Easy to Work With.
- Single Cable with 12 Marine-Grade Wires – 14/16 AWG
- Temperature: 105°C Dry, 75°C Wet
- Voltage: 600 Volts
- Stranding: Class K 30 Gauge Tinned Copper
- Standard: UL 1426 & UL Listed BC-5W2
- Connected to the Panel via Terminal Strip
*If Engine Octopus is Purchased Along with the Wiring Harness, The Opposing End Will Have a 12-Pin Deutsch Connector*
*DOES NOT COME WIRED TO TERMINAL STRIP*
Marine-Grade Wire & Features:
- USCG / NMEA Specification Copper-Tinned Wire
- Flexible Cable – Water and Oil-Resistant
- 10″ to 12″ Pigtail Harness Connected to 12-Position Terminal Strip
12 Circuit 30 Amp Terminal Strip Features:
- Closed Back Design Completely Insulates Power from the Mounting Surface
- Each Screw Pair is one Isolated Circuit
- Jumpers Allow Creation of Common Circuits
Additional Options Available:
- Black or White Panel
- Engraved with Engine Name (Optional – Your Boat Name)
- Customize Panel Size, Gauges, Design, and Switches — Just Contact Us (Extra Charges May Apply)
Please Specify Your Requirements
If You Have any Technical Questions, Please Feel Free to Call or Email Us
All Panels are Made in the USA by AC DC Marine Inc. Torrance, California