Cummins Instrument Panel Kit w/ Sending Units
- Fully Wired Instrument Panel with 5 Marine Grade Gauges
- Oil Pressure Sender 80PSI
- Temperature Sender (must give size)
- Pressure Switch
- Temperate Alarm
- RPM Sender (Magnetic Sensor)
Substitute with different gauges for free! Click here to see our gauge selection.
Panel Material: UV Resistant
Dimensions: 12″ x 6 5/8″
Fog resistant Marine Grade Gauges:
- 4000 RPM Programmable Tachometer with Digital Hour Meter 7 character LCD display
- 250ºF Temperature Gauge
- 80 PSI Oil Pressure Gauge
- 12 VDC Voltmeter
- Fuel gauge
Tachometer Hourmeter features:
- Electronic tachometers work by counting pulses generated by the ignition system, alternator, tach signal generator or magnetic pickup sender.
- Hooked up to +12vDC, Ground and your signal source.
- updates in .1 increments
- 0-999999.9 Hours
- 7 character LCD display
- The analog looking dial and pointer sweep is driven by a digital stepper motor providing greater accuracy and dependability than magnetically wound gauges. You get the advantages of digital instrumentation with the look and feel of the analog gauges.
Sealed Ignition Key Switch by Littelfuse Features:
- Sealed Key Switch With Anti-restart
- Set of keys included
- With anti-restart. [So you are prevented from double cranking the engine]
- 10A at 12V
- Four positions: Accessory – Off – Ignition/Accessory – Start. Spring return to Off.
- Keyswitch is constructed from engineering thermoplastic and is fully sealed using O-rings and ultrasonic welding to protect switch to ip67(with connector installed)
- Plastic facenut and nickel-plated brass backing nut. Supplied with two matching keys. With protective key boot.
- Sealed to IP67
Marine Grade Wire Features:
- Copper tinned
- wired with ABYC Color code
- 10″ to 12″ Pigtail Harness connected to 12 position terminal strip
12 Circuit 30 Amp Terminal Strip Features
- Closed back design completely insulates power from the mounting surface
- Each screw pair is one isolated circuit
- Jumpers allow creation of common circuits
- Marine grade push button Switch (Engine Stop or Pre-heat)
- 2 tone Pizzo Siren Alarm
- Senders and Accessories not Included
- Engraved with Engine Name
Made and Designed in Southern California
Cummins Instrument Panel Kit With Senders Included
fuel sender not included with this purchase, because there are many different fuel tank sizes. If you need a fuel sender (liquid level sensor) please measure how tall your fuel tank is, and then purchase a unit that is 1 inch smaller than your measurements from our senders store category.
|Dimensions||12 × 6.5 × .25 in|
Universal 12" x 6.5", Cummins 12" x 6.5", Lehman 12" x 6.5", Detroit Diesel 12" x 6.5", Universal 12" x 6.5"
Programmable Tach (RPM from Magnetic Sensor)
Only logged in customers who have purchased this product may leave a review.