MAN Marine Engine Instrument Panel #Pre Wired USA Made
Panel Material: marine Acrylic, polycarbonate , marine Plexiglas
Dimensions: 10.5″ X 8″
Black Panel With Black Gauges
Fog resistant Marine Grade Gauges Made in the USA :
CANBUS (J1939) Marine gauges 280° Reading for more Accuracy /CANBUS 4000 RPM Programmable Tachometer with Digital Hour Meter 7 Character LCD Display
- Engine Coolant Water Temp Gauge 100-240°F
- Engine Oil Pressure Gauge 0-80 PSI
- 12V Voltmeter Gauge
- Fuel Level Gauge F-E 240-33 ohms
Hydraulic Oil Temp gauge
- Low oil Hi-Temp LED warning indicator ( bright sunlight viewable )
Sealed Ignition Key Switch by Littelfuse (Cole Hersee)
- made for the marine environment ( Water Proof )
- Engineering thermoplastic construction.
- Fully sealed contact area using O-rings and ultrasonic welding.
- Integral sealed Deutsche connector.
- Anti-restart option.
- Tested to SAE J259 for ignition switches.
- Supplied with two matching keys, with or without boot.
- Multiple key codes or keyed alike available.
- Key is removable only at the Off position.
Marine Grade WireFeatures:
- USCG / NMEA specification Copper tinned wire
- flexible cable water and oil resistant
- 10″ to 12″ Pigtail Harness connected to 12 position terminal strip
12 Circuit 30 Amp Terminal Strip
- Closed back design completely insulates power from the mounting surface
- Each screw pair is one isolated circuit
- Jumpers allow creation of common circuits
- Marine grade push button Switch (Engine Stop or Pre-heat)
- Senders and Accessories not Included
- Engraved with Engine Name (optional your boat Name)
- 2 tone Piezo Siren Alarm
#Note Always you can choose between
- Black and White Panel .
- Black And White Gauges.
- 24V System Available (optional )
- Also you can Custom your panel size , gauges, design and switches, just contact us (extra charge applicable )
All panels are made in the USA by AC DC Marine Inc.California
|Dimensions||10.5 × 8.5 × 5 in|