Description
KUS Holding Tank Sensor SHS-Series
Marine Boat Waste Water Tank Level Sending Unit
The Holding Tank Level Sender is Used in Mainly Black or Grey Water Tanks. Can also be Used in Freshwater Tanks
Connector: Delphi, Tyco, or Others are Available According to Customer’s Requirements Upon Request
IP Rating: IP 67
Length: 9.84″
Material: SS316 Stainless Steel
Max Current: 500mA
Mounting: NPT 1 1/2″ Thread Twist-in, with Standard 6 hole Thread Flange Plate, Standard 6 Hole Under Ring and 6 Piece of M5x30 Screws
Operating Temperature: -40°F ~ +185°F (-40°C ~ +85°C)
Output Signal: 240-33Ω — 0-190Ω Available Upon Request
Rated Power: 125mW
Resolution Range: 10~40MM
Wire: PVC Material (PA Corrugated Pipe Cover is Optional)
Additional Information:
Installation: https://acdcmarineinc.com/wp-content/uploads/2021/04/KUS-USA_SendingUnit_Installation_v4-scaled.jpg
Troubleshooting Guide: https://acdcmarineinc.com/wp-content/uploads/2021/04/KUS-1.pdf
If You Have any Technical Questions, Please Feel Free to Call or Email Us
