Description
Cummins Engine Digital Instrument Panel with 5 VMH Gauges
Fully-Wired / Ready to Install
Dimensions: 10 7/8″ x 8″
Panel Material: Marine Acrylic, Polycarbonate, Marine Plexiglass
Black Panel / Premier Gauges
Fog-Resistant Marine Grade Gauges:
- Veratron VMH-35 Digital Tachometer
• Displays 30 Types of Data: RPM, Trip Time, Engine Hour Meter, Clock, Voltage, Coolant Temperature (Must have Sensor), Oil Pressure (Must Have Sensor) & More
• SAE J1939 CAN Port
• NMEA 2000 Interface
• 4x Analog Input for External Sensors
• EasyLink Output for up to 16 VMH 14 Satellites
• Analog/CAN to NMEA 2000® Gateway
2. 4x Veratron VMH-14 Digital Gauges
When combined with a VMH Master Device, the Instrument will display the Data in a Bright and Digital Form, Thanks to its Sun-Readable Color Display with Outstanding Outdoor performance.
Kit Includes:
- Fully Wired Instrument Panel with 5 Digital Marine-Grade Gauges
- Rocker Switches for Enable, Start & Shutdown
- Engine Alarm Warning LED
- Piezo Siren Alarm
- Temperature Sending Unit
- Oil Pressure Sending Unit
*Sending Units May Vary Depending on Engine(s)*
*Engine Wiring Harness (Optional Add-On): Lengths of 15ft and 25ft.
*If You Need any Other Length, No Problem — Just Give us a Call!*
-
- Single Cable with 12 Marine-Grade Wires
- 14 Gauge: Black
- 14 Gauge: Red
- 16 Gauge: Dark Blue
- 16 Gauge: Light Blue
- 16 Gauge: Dark Brown
- 16 Gauge: Light Brown
- 16 Gauge: Gray
- 16 Gauge: Yellow
- 16 Gauge: White
- 16 Gauge: Purple
- 16 Gauge: Light Blue/White Stripe
- 16 Gauge: Dark Blue/White Stripe
- Single Cable with 12 Marine-Grade Wires
- This Product Offers a Unique Flame-Retardant Polyvinyl Chloride Compound (VW-1) and is Moisture, Abrasion, Acid, Diesel Fuel, and Oil Resistant. It is Extremely Flexible & easy to work with.
- Single Cable with 12 Marine-Grade Wires – 14/16 AWG
- Temperature: 105°C Dry, 75°C Wet
- Voltage: 600 Volts
- Stranding: Class K 30 Gauge Tinned Copper
- Standard: UL 1426 & UL Listed BC-5W2
- Connects to the Panel via Terminal Strip
*If Engine Octopus is Purchased Along with the Wiring Harness, The Opposing End Will Have a 12-Pin Deutsch Connector*
*DOES NOT COME WIRED TO TERMINAL STRIP*
Marine-Grade Wire & Features:
- USCG / NMEA Specification Copper-Tinned Wire
- Flexible Cable – Water and Oil-Resistant
- 10″ to 12″ Pigtail Harness Connected to 12-Position Terminal Strip
12 Circuit 30 Amp Terminal Strip Features:
- Closed Back Design Completely Insulates Power from the Mounting Surface
- Each Screw Pair is one Isolated Circuit
- Jumpers Allow Creation of Common Circuits
Additional Options Available:
- Black or White Panel
- Engraved with Engine Name (Optional – Your Boat Name)
- Customize Panel Size, Gauges, Design, and Switches — Just Contact Us (Extra Charges May Apply)
Please Specify Your Requirements
If You Have any Technical Questions, Please Feel Free to call or Email Us
All Panels are Made in the USA by AC DC Marine Inc., Torrance, California
