Description
Caterpillar Engine Instrument Panel – 5 OceanLink Gauges
Fully-Wired / Ready to Install
Product Description
Panel Material: Marine Acrylic, Polycarbonate, Marine Plexiglass
Black Panel With Black or White OceanLink Gauges
Fog-Resistant Marine Grade Gauges:
- 5000 RPM Programmable Tachometer with Digital Hour Meter 7 Character LCD Display (All Pick-Ups Compatible)
- Engine Coolant Water Temp Gauge 40-120°C / 100-250 °F
- Engine Oil Pressure Gauge 0-80 PSI / 0-5 PSI
- Engine Oil Temp Gauge 50-150°C / 120-300°F (Link-Up Adapter)
- 12V Voltmeter Gauge
• 1x NMEA 2000® input
• 1x J1939 and analog input
• 1x Alarm output 500 mA
• Reverse polarity protection
• Anti-fog double layer plastic lens
• Protection rating IPX7
• Operating temperature range -20 °C / +70 °C
OceanLink™ 52 mm Gauges are Connected Directly to any OceanLink™ Master Unit Using the Patented EasyLink Serial Bus Connection.
EasyLink Data Connection makes Installation Easy and Cost-Effective. Satellite Instruments for Further Dynamic Measurement Values Receive Updates from the Central Instrument Every 20 msec.
Kit Includes:
- Fully Wired Instrument Panel with 5 Marine-Grade Gauges
- Cole Hersee Sealed Ignition Key Switch
- Push Button for Engine Stop
- NMEA 2000 Linkup Resistive Adapter
Features and Benefits of Cole Hersee Sealed Ignition Key Switch:
- Engineering Thermoplastic Construction
- Fully Sealed Contact Area Using O-Rings and Ultrasonic Welding
- Integrated Sealed Deutsch Connector Interface
- Anti-Restart and Spring-Return Options Available
- Tested to SAE J259 for Ignition Switches
- Supplied with Two Matching Keys, with or without Boot
- Custom Logo can be Molded on the Boot
- Multiple Key Codes or Keyed Alike Available
- Key is Removable only at the ‘Off’ Position
An Extensive Series of Ignition Switches can also be Used as Rotary Switches. Suitable for a Broad Range of Voltages: 10A at 12V, 5A at 24V, 3A at 36V and 2A at 48V DC. Made of Rugged Engineering-Grade Plastic, these Switches Stand up to Mechanical Shock & Vibration, and Will not Corrode or Rust. This Switch has an Integrated Deutsch-Type Socket to Make Electrical Connection Quick and Easy & to Exclude Moisture and Dust. UL-Tested & Recognized to SAE J259 for Ignition Switches. Contacts are sealed front and back to IP67 (with connector installed). Many Options Available with Regard to Position, Spring-Return, Key Boot Style and Marking, Actuator Interface and Length, & Anti-Restart Features.
-
- Temperature Sending Unit
- Oil Pressure Sending Unit
*Sending Units May Vary Depending on Engine(s)*
*Engine Wiring Harness (Optional Add-on): Lengths of 30ft and 50ft.
*If You Need any Other Length, No Problem. Just Give us a Call!*
-
-
- This Product Offers a Unique Flame-Retardant Polyvinyl Chloride Compound (VW-1) and is Moisture, Abrasion, Acid, Diesel Fuel, and Oil Resistant. It is Extremely Flexible & Easy to Work With.
- Single Cable with 12 Marine-Grade Wires – 14/16 AWG
- Temperature: 105°C dry, 75°C wet
- Voltage: 600 Volts
- Stranding: Class K 30 Gauge Tinned Copper
- Standard: UL 1426 & UL Listed BC-5W2
- Connected to the Panel via Terminal Strip
-
*Second Station Panel Kit Features (Optional Add-on):
- 5 OceanLink Gauges:
-
- 5000 RPM Programmable Tachometer with Digital Hour Meter 7 Character LCD Display (All Pick-Ups Compatible)
- Engine Coolant Water Temp Gauge 40-120°C / 100-250 °F
- Engine Oil Pressure Gauge 0-80 PSI / 0-5 PSI
- Engine Oil Temp Gauge 50-150°C / 120-300°F (Link-Up Adapter)
- 12V Voltmeter Gauge
- 2x Push Buttons (Eng. Stop) & ( Eng. Start)
Marine-Grade Wire & Features:
- USCG / NMEA Specification Copper-Tinned Wire
- Flexible Cable – Water and Oil-Resistant
- 10″ to 12″ Pigtail Harness Connected to 12-Position Terminal Strip Colors may vary for installation purpose.
12 Circuit 30 Amp Terminal Strip Features:
- Closed-Back Design Completely Insulates Power From the Mounting Surface
- Each Screw Pair is One Isolated Circuit
- Jumpers Allow the Creation of Common Circuits
Additional Options Available:
- Black or White Panel.
- 24v System Available
- Black, White or Chrome Bezels Available & Sold Separately
- Engraved with Engine Name (Optional – Your Boat Name)
- Customize Panel Size, Gauges, Design, and Switches — Just Contact Us (Extra Charge Applicable)
Please Specify Your Requirements
If You Have any Technical Questions, Please Feel Free to Call or Email us.
All Panels are Made in the USA by AC DC Marine Inc. Torrance, California
