**Cummins Marine Instrument Panel With NMEA 2000 Engine Data Converter Package black
12 in stock
**Cummins Marine Instrument Panel With NMEA 2000 Black
Engine Data Converter Package
Panel Material: marine Acrylic, poly carbonate , marine Plexiglas
Dimensions: 12″ X 6.5″
Black Panel With Black Gauges
Fog resistant Marine Grade Gauges:
- 4000 RPM Programmable Tachometer with Digital Hour Meter 7 Character LCD Display (Alternator , magnetic , signal generator Pick Up Available) please specify
- Engine Coolant Water Temp Gauge 40-120 °C or 100-240 °F
- Engine Oil Pressure Gauge 0-80 PSI or 0-5 Bar
- 12 V Voltmeter Gauge
- Fuel Level Gauge E-F 240-33 ohms
- Low oil ,Hi Temp LED warning indicator ( bright sun light viewable )
Sealed Ignition Key Switch by Littelfuse(cole Hersee)
- made for marine environment ( Water Proof )
- Engineering thermoplastic construction.
- Fully sealed contact area using O-rings and ultrasonic welding.
- Integral sealed Deutsche connector.
- Anti-restart option.
- Tested to SAE J259 for ignition switches.
- Supplied with two matching keys, with or without boot.
- Multiple key codes or keyed alike available.
- Key is removable only at the Off position.
Marine Grade WireFeatures:
- USCG / NMEA specification Copper tinned wire
- flexible cable water and oil resistant
- 10″ to 12″ Pigtail Harness connected to 12 position terminal strip
12 Circuit 30 Amp Terminal Strip
- Closed back design completely insulates power from the mounting surface
- Each screw pair is one isolated circuit
- Jumpers allow creation of common circuits
- Marine grade push button Switch (Engine Stop or Pre-heat)
- Senders and Accessories not Included
- Engraved with Engine Name (optional your boat Name)
- 2 tone Piezo Siren Alarm
• The RS11 Engine Data Converter converts tachometer signals and analog gauge voltages from virtually any engine into CANbus digital messages (NMEA 2000).
• It is configurable for either single or dual engine installations and includes a USB PC interface for initial configuration, data monitoring, and software updates.
• Output messages are applied to the CANbus for display by compatible devices
• The RS11 is designed for versatile interfacing to almost any type of analog engine sensor or gauge commonly used on marine or automotive engines.
• It has two pulse (RPM/Fuel Flow) inputs, six analog (gauge) inputs and supports both 12 and 24 volt systems.
• The analog inputs can be assigned all to one engine or be split between two engines. Multiple RS11’s can be installed on the same CANbus.
• The RS11 can be used with existing analog gauges or as a replacement for them.
• Current sources within the RS11 will power resistive sending units where gauges have been removed or new senders(without gauges) have been added.
Note Always you can choose between
- Black and White Panel .
- Black And White Gauges.
- 24V System Available (optional )
- Also you can Custom your panel size ,gauges, design and switches , just contact us (extra charge applicable )
All panels are made in the USA by AC DC Marine Inc.California
|Dimensions||12 × 6.5 × 5 in|