Description
Yanmar Diesel Engine Panel – 3 OceanLink Gauges, Built-In NMEA 2000 Convertor
Fully-Wired / Ready to Install
Dimensions: 11″ x 6″
Panel Material: Marine Acrylic, Polycarbonate, Marine Plexiglass
Black Panel / OceanLink Gauges
Fog-Resistant Marine Grade Gauges:
- OceanLink 3000, 5000 or 7000 RPM Programmable Tachometer with Digital Multi-Function LCD Display (All Pick-Ups Compatible)
- OceanLink Engine Coolant Water Temp Gauge 100-250°F/40-120°C
- OceanLink Engine Oil Pressure Gauge 0-150 PSI/0-10 Bar
- 1x NMEA 2000® Input
- 1x J1939 Analog Input
- 1x Alarm Output 500 mA
- Reverse Polarity Protection
- Anti-Fog Double Layer Plastic Lens
- Protection Rating: IPX7
- Operating Temperature Range: -20°C/+70°C
OceanLink™ 52MM Gauges are connected directly to any OceanLink™ Master unit using the patented EasyLink serial bus connection.
EasyLink Data Connection makes Installation Easy and Cost-Effective. Satellite Instruments for Further Dynamic Measurement Values Receive Updates from the Central Instrument Every 20 msec.
Kit Includes:
- Fully Wired Instrument Panel with 3 Marine-Grade Gauges
- Cole Hersee Sealed Ignition Key Switch
- Push Button for Engine Stop, Preheat, Test, Mode, Prog, etc.
- Piezo Siren Alarm
Benefits of using OceanLink™ Gauges:
- Easy and Effective Use
- Perfectly Readable Engine Monitoring Thanks to Increased Performance Presentation
- The EasyLink Data Connection and the Plug & Play Solution Provide a Flexible Installation of the Panel, Front, and Flush-Mounted Instruments
- Decades of Experience Guarantee a Fully Reliable, Modern Navigation and Engine Monitoring System with NMEA 2000®
- A Solid Housing Design Completely Sealed Against Dust and Highly Water-Resistant (IPX7 Front and Rear)
- High-Quality Precision Instruments Designed in Switzerland
Features and Benefits of Cole Hersee Sealed Ignition Key Switch:
- Engineering Thermoplastic Construction
- Fully Sealed Contact Area Using O-Rings and Ultrasonic Welding
- Integrated Sealed Deutsch Connector Interface
- Anti-Restart and Spring-Return Options Available
- Tested to SAE J259 for Ignition Switches
- Supplied with Two Matching Keys, with or without Boot
- Custom Logo can be Molded on the Boot
- Multiple Key Codes or Keyed Alike Available
- Key is Removable only at the ‘Off’ Position
An Extensive Series of Ignition Switches can also be Used as Rotary Switches. Suitable for a Broad Range of Voltages: 10A at 12V, 5A at 24V, 3A at 36V and 2A at 48V DC. Made of Rugged Engineering-Grade Plastic, these Switches Stand up to Mechanical Shock & Vibration, and Will not Corrode or Rust. This Switch has an Integrated Deutsch-Type Socket to Make Electrical Connection Quick and Easy & to Exclude Moisture and Dust. UL-Tested & Recognized to SAE J259 for Ignition Switches. Contacts are sealed front and back to IP67 (with connector installed). Many Options Available with Regard to Position, Spring-Return, Key Boot Style and Marking, Actuator Interface and Length, & Anti-Restart Features.
- Temperature Sending Unit
- Oil Pressure Sending Unit
*Sending Units May Vary Depending on Engine(s)*
*Engine Wiring Harness (Optional Add-On): Lengths of 15ft and 25ft.
*If You Need any Other Length, No Problem — Just Give us a Call!*
-
- Single Cable with 12 Marine-Grade Wires
- 14 Gauge: Black
- 14 Gauge: Red
- 16 Gauge: Dark Blue
- 16 Gauge: Light Blue
- 16 Gauge: Dark Brown
- 16 Gauge: Light Brown
- 16 Gauge: Gray
- 16 Gauge: Yellow
- 16 Gauge: White
- 16 Gauge: Purple
- 16 Gauge: Light Blue/White Stipe
- 16 Gauge: Dark Blue/White Stripe
- Single Cable with 12 Marine-Grade Wires
- This Product Offers a Unique Flame-Retardant Polyvinyl Chloride Compound (VW-1) and is Moisture, Abrasion, Acid, Diesel Fuel, and Oil Resistant. It is Extremely Flexible & Easy to Work With.
- Single Cable with 12 Marine-Grade Wires – 14/16 AWG
- Temperature: 105°C dry, 75°C wet
- Voltage: 600 Volts
- Stranding: Class K 30 Gauge Tinned Copper
- Standard: UL 1426 & UL Listed BC-5W2
- Connects to the Panel via Terminal Strip
*If Engine Octopus is Purchased Along with the Wiring Harness, The Opposing End Will Have a 12-Pin Deutsch Connector*
*DOES NOT COME WIRED TO TERMINAL STRIP*
Marine-Grade Wire & Features:
- USCG / NMEA Specification Copper-Tinned Wire
- Flexible Cable – Water and Oil-Resistant
- 10″ to 12″ Pigtail Harness Connected to 12-Position Terminal Strip
12 Circuit 30 Amp Terminal Strip Features:
- Closed Back Design Completely Insulates Power from the Mounting Surface
- Each Screw Pair is one Isolated Circuit
- Jumpers Allow Creation of Common Circuits
Additional Options Available:
- Black or White Panel
- Black, White and Chrome Bezels Available & Sold Separately
- Engraved with Engine Name (Optional – Your Boat Name)
- Customize Panel Size, Gauges, Design, and Switches — Just Contact Us (Extra Charges May Apply)
Please Specify Your Requirements
If You Have any Technical Questions, Please Feel Free to Call or Email Us
All Panels are Made in the USA by AC DC Marine Inc. Torrance, California
